INVERTIG.PRO DIGITAL - REHM WELDING TECHNOLOGY - United Kingdom Website

Search
Go to content

Main menu

INVERTIG.PRO DIGITAL

TIG Welding > NEW DIGITAL TIG

TIG
Advanced  DIGITAL Inverter Powered
TIG Welding Machines

All Models are rated 100% Duty Cycle at Maximum Output

  • INVERTIG.PRO 240 DC  DIGITAL

  • INVERTIG.PRO 280 DC  DIGITAL

  • INVERTIG.PRO 350 DC  DIGITAL

  • INVERTIG.PRO 450 DC  DIGITAL


  • INVERTIG.PRO 240 AC/DC  DIGITAL

  • INVERTIG.PRO 280 AC/DC  DIGITAL

  • INVERTIG.PRO 350 AC/DC  DIGITAL

  • INVERTIG.PRO 450 AC/DC  DIGITAL


Power Output                 Power Input
3 to 450Amps                  400v  3-Phase


The INVERTIG.PRO DIGITAL TIG Range - weld from 3 to 450 Amps - 100% Duty Cycle - only 31 kg !   


The INVERTIG.PRO DIGITAL TIG Range includes the following features:

  • REVOLUTIONARY OPERATION - DIGITAL SIMPLICITY

  • Graphical Dynamic Interactive Display

  • 3 to 450 Amps

  • 100% Duty Cycle

  • 240A / 280A / 350A and 450A Machines

  • Our lightest 240A DC machine weighs only 25 kg !

  • Our heaviest 450A  AC/DC Machine weighs only 31 kg !

  • The INVERTIG.PRO DIGITAL range offers the user exceptional arc characteristics and control


  • All machines will weld at an incredible 3 amps - This coupled with separate control of the Ignition Energy and start current, allow arc striking on the very edge of the thinest of materials

  • Intelligent Ignition Control - Ignition energy is infinitely variable between 10% and 100% of the welding current for perfectly smooth arc ignition on both HF and Lift-Arc, offering exceptional control when welding thin materials at low amperage

  • Selectable HF Ignition Control - Allows you to tackle the smallest of jobs, even in sensitive electronic and computer environments, offering HF Ignition (which is switched off once the arc is established in both AC and DC modes), Lift-Arc Ignition which establishes the arc without using any HF, allowing for example, the repair of sensitive CNC equipment in hospitals which would normally risk being damaged by high-voltage

  • Intelligent Start Current Control - Set after the ignition process.  The start current is infinitely variable between 10% and 99% of the welding current for perfectly smooth arc starting on both HF and Lift-Arc, offering exceptional control when welding thin materials at low amperage. Often used with Intelligent Ignition Control

  • Pulse Control as standard - Reduced heat input and increased weld quality and control. Especially useful when welding thin materials. Both conventional and high frequency pulsing is available

  • Conventional Pulsing - offers pulse times of 0.1 second to 5 seconds, in 0.1 increments

  • High Frequency Pulsing - between 10 Hz and 500 Hz.

  • Ultra High Frequency Pulsing -  up to 15,000 Hz.

  • AC Frequency - adjustment between 30 Hz to 300 Hz.

  • AC Curve Shape - Offering Curve selection from Sine Wave, Triangular Wave, Square Wave, AC-Matic Wave.

  • Fully Programmable - The operator can store up to 1000 programs, creating his own named folders, offering total repeatability and job selection at a touch of a button

  • Dual Wave Mode - For the welding of Aluminium. This new patented process allows far greater control of the weld pool when welding Aluminium out of position and results in significant quality improvements. (AC/DC Machine Only)

  • AC Wave Balance Control - Wave balance can be adjusted from -80% to +80% allowing the arc to be influenced to enhance greater cleaning or penetration during the welding of Aluminium. (AC/DC Machine Only)

  • REHM Automatic Frequency Control System - The frequency is automatically adjusted to the current intensity during AC welding. This offers superior arc characteristics along with improved tungsten life and efficiency. For difficult applications, manual adjustment is also available.


REHM Invertig.Pro Tig Machine
TIG COOL CART

INVERTIG.PRO  DIGITAL

German Technology working at the highest level

TIG Welding Revolutionised
The new INVERTIG.PRO DIGITAL range revolutionises TIG welding from start to finish.

  • INVERTIG.PRO DIGITAL - Weld Seam Quality and Energy Efficiency defines new standards world-wide.

  • INVERTIG.PRO DIGITAL - 100% Duty Cycle for un-interrupted TIG Welding

  • INVERTIG.PRO DIGITAL - offers a fully comprehensive range from 240Amps DC to 450Amps AC/DC.

  • INVERTIG.PRO DIGITAL - almost unlimited flexibility in a variety of different welding applications.

  • INVERTIG.PRO DIGITAL - delivers performance and repeatability.

  • INVERTIG.PRO DIGITAL - probably the greatest power to weight ratio available today


The new TIG feel from REHM
The INVERTIG.PRO DIGITAL combines the finest welding technology with the greatest degree of operating convenience.  The unique partnership of the newly developed Bi-Power-Inverter and the precise, digital welding process regulation system offers as yet unattained welding properties.  Regardless of whether you are welding steel, stainless steel, nickel or nickel-based alloys, titanium, copper or aluminum (AC/DC), thick or thin materials, using standard or special gases, the precise co-ordination of the high-quality performance components guarantees fantastic Arc Ignition and welding properties with precise and repeatable quality control at all times.
Designed for flexible use, the INVERTIG.PRO DIGITAL range covers a wide range of applications and is important when performance and durability affect economy.

INVERTIG.PRO DIGITAL - The Revolution

  • Unbelievably simple, and amasingly easy to handle and operate - even when wearing gloves!.

  • Easy to read, clear and totaly dynamic, interactive full colour graphical interface - self-explanatory controls and operation

  • Highest duty cycle and output at a sensationally low weight

  • No limits - TIG Weld for as long as you want!

  • 100 % Duty Cycle for ALL units in the INVERTIG.PRO range


Perfect arc stability

  • The rapid and precise welding process controller keeps the arc stable in all situations.

  • Perfectly safe and precise arc ignition thanks to the innovative ignition management system.

  • Where other machines give up, the INVERTIG.PRO continues to operate perfectly.


iSYSTEM - Inteligent System

  • The CAN-networked multiprocessor architecture, linked to intelligent expansion modules, opens up a wide range of uses.  Simply Plug & Play.



INVERTIG.PRO - Secure and Simple Operation


Child's play - The REHM operating concept

R-Pilot - wide range of functions and easy to operate

  • Pure ergonomics: Anyone can start using the INVERTIG.PRO immediately.

  • All of the essential settings can be made precisely, and in mere seconds, using a single button.

  • Greatest operating convenience - even with your welding gloves on!

  • The large and clear full colour graphical operating panel is self-explanatory.

  • The centrally arranged R-Pilot can be used to quickly and safely access all sectors of the welding parameters important to the user.


Access Authorisation
An increasing number of companies now require fixed welding parameters for certain tasks in order to safeguard quality.  This is particularly so in the Aerospace Industry.
The INVERTIG.PRO DIGITAL gives the authorised user the possibility to limit the level of access via a password
The INVERTIG.PRO DIGITAL gives the authorised user the ability to pre-set a parameter tolerance range into the machine of between 0% and 30%, safeguarding weld procedures.


Program Memory

  • The INVERTIG.PRO DIGITAL allows you to save up to 1000 programs in your own personal folders.

  • This saves time and also enables you to work quickly whilst guaranteeing repeatable welding results at the same time.


Quick Choice Buttons

  • Safety, convenience and time-saving.  The QUICK CHOICE buttons P1 and P2 allow two current settings of a welding task to be saved quickly and easily.

  • These welding programs can be called up by pressing the relevant button, or pressing the R-TIG Up/Down button on the welding torch.


> INVERTIG.PRO  DIGITAL            PULSED TIG WELDING MACHINES - 3 to 450 Amps

INVERTIG.PRO DIGITAL
BROCHURE

Pulsed TIG Machines 240, 280, 350 and 450 Amp models
DC and AC/DC versions
400v 3-Phase Supply
Portable

 
 

INVERTIG.PRO DIGITAL


TIG Welding Machines DIGITAL INTERFACE

Advanced BI-POWER Inverter 240A/280A/350A/450A
3-Phase 3x400v supply - AC/DC or DC only output
All 100% Duty Cycle for continious welding
Maximum weight of only 31.00 kg

Digital Machine with full colour high definition graphical display, including project folders, manual and automated welding parameter selection, Hyperpuls system pulsing up to 15,000 Hz



INVERTIG.PRO DIGITAL 240 DC TIG SET

  • Only 25 kg in weight!

  • A massive 240 amps @ 100% Duty Cycle - Weld all day!

  • High Frequency Pulsing up to 3000 Hz


Advanced Inverter Power Source

Output current:   3 - 240 Amps
Duty cycle:         240 Amps  @ 100 %  (40°C)
Input voltage:     400 V / 3 phase
Fuse Rating:       16 Amp
Weight:              25 kg
Size [mm]:         520x360x460


INVERTIG.PRO DIGITAL 240 AC/DC TIG SET

  • Only 27 kg in weight!

  • A massive 240 amps @ 100% Duty Cycle - Weld all day!

  • High Frequency Pulsing up to 3000 Hz


Advanced Inverter Power Source

Output current:   3 - 240 Amps
Duty cycle:         240 Amps  @ 100 %  (40°C)
Input voltage:     400 V / 3 phase
Fuse Rating:       16 Amp
Weight:              27 kg
Size [mm]:         520x360x460


INVERTIG.PRO DIGITAL 280 DC TIG SET

  • Only 25 kg in weight!

  • A massive 280 amps @ 100% Duty Cycle - Weld all day!

  • High Frequency Pulsing up to 3000 Hz


Advanced Inverter Power Source

Output current:   3 - 280 Amps
Duty cycle:         280 Amps  @ 100 %  (40°C)
Input voltage:     400 V / 3 phase
Fuse Rating:       16 Amp
Weight:              25 kg
Size [mm]:         520x360x460


INVERTIG.PRO DIGITAL 280 AC/DC TIG SET

  • Only 27 kg in weight!

  • A massive 280 amps @ 100% Duty Cycle - Weld all day!

  • High Frequency Pulsing up to 3000 Hz


Advanced Inverter Power Source

Output current:   3 - 280 Amps
Duty cycle:         280 Amps  @ 100 %  (40°C)
Input voltage:     400 V / 3 phase
Fuse Rating:       16 Amp
Weight:              27 kg
Size [mm]:         520x360x460


INVERTIG.PRO DIGITAL 350 DC TIG SET

  • Only 30 kg in weight!

  • A massive 350 amps @ 100% Duty Cycle - Weld all day!

  • High Frequency Pulsing up to 3000 Hz


Advanced Inverter Power Source

Output current:   3 - 350 Amps
Duty cycle:         350 Amps  @ 100 %  (40°C)
Input voltage:     400 V / 3 phase
Fuse Rating:       32 Amp
Weight:              30 kg
Size [mm]:         520x360x460


INVERTIG.PRO DIGITAL 350 AC/DC TIG SET

  • Only 31 kg in weight!

  • A massive 350 amps @ 100% Duty Cycle - Weld all day!

  • High Frequency Pulsing up to 3000 Hz


Advanced Inverter Power Source

Output current:   3 - 350 Amps
Duty cycle:         350 Amps  @ 100 %  (40°C)
Input voltage:     400 V / 3 phase
Fuse Rating:       32 Amp
Weight:              31 kg
Size [mm]:         520x360x460


INVERTIG.PRO DIGITAL 450 DC TIG SET

  • Only 30 kg in weight!

  • A massive 450 amps @ 100% Duty Cycle - Weld all day!

  • High Frequency Pulsing up to 3000 Hz


Advanced Inverter Power Source

Output current:   3 - 450 Amps
Duty cycle:         450 Amps  @ 100 %  (40°C)
Input voltage:     400 V / 3 phase
Fuse Rating:       32 Amp
Weight:              30 kg
Size [mm]:         520x360x460


INVERTIG.PRO DIGITAL 450 AC/DC TIG SET

Only 31 kg in weight!
A massive 450 amps @ 100% Duty Cycle - Weld all day!
High Frequency Pulsing up to 3000 Hz


Advanced Inverter Power Source

Output current:   3 - 450 Amps
Duty cycle:         450 Amps  @ 100 %  (40°C)
Input voltage:     400 V / 3 phase
Fuse Rating:       32 Amp
Weight:              31 kg
Size [mm]:         520x360x460


















> TIG-COOL 2000 iSYSTEM            Water Coolers for INVERTIG.PRO DIGITAL

TIG-COOL CART 2000
Water Cooler


TIG-COOL CART 2000 iSYSTEM Water Cooler


  • High Powered Water Cooler 2000W  2.3 l/min max

  • Plug and Play Connection through CAN-BUS

  • Completely Automatic Control when used with the INVERTIG.PRO

  • Three Modes: Auto, On and Off

  • Control Panel to indicate operating mode and fault diagnosis

  • Flow Sensor

  • Temperature Monitoring

  • Crane Eyes for easy handling

  • Heavy Duty Centrifugal Pump


Advanced Water Cooler

Tank Capacity:    5.0 litres
Cooling Power:    2000W  (20°C)
Flow Rate:          2.3 l/min  (Max)
Pump Pressure:   3.8 bar 0.38 MPa  (Max)
Input voltage:     400 V / 3-phase
Fuse Rating:       16 Amp
Weight:              62.0 kg  (without coolant)


All our INVERTIG.PRO Machines fit perfectly on our TIG-COOL CART 2000 iSYSTEM Water Cooler.

The water cooler compliments the INVERTIG.PRO by providing powerful water cooling for the most demanding of jobs, whilst also providing a convenient way of moving your machine around the workshop.

An Optional TIG-COOL 2000 iSYSTEM Water Cooler is available in a smaller unit without the large front handle and cylinder carrier at the rear.

This type of water cooler is more suitable when the cooler is mainly positioned at the side of a bench and is moved more occasionally.







> TIG-COOL       1400                    Water Coolers for INVERTIG.PRO DIGITAL

TIG-COOL CART 1400
Water Cooler


TIG-COOL CART 1400 Water Cooler


  • High Powered Water Cooler 1400W  2.3 l/min max

  • Crane Eyes for easy handling

  • Heavy Duty Centrifugal Pump


Water Cooler

Tank Capacity:    5.0 litres
Cooling Power:    1400W  (20°C)
Flow Rate:          2.3 l/min  (Max)
Pump Pressure:   3.8 bar 0.38 MPa  (Max)
Input voltage:     400 V / 3-phase
Fuse Rating:       16 Amp
Weight:              62.0 kg  (without coolant)


All our INVERTIG.PRO Machines fit perfectly on our TIG-COOL CART 1400 Water Cooler.

The water cooler compliments the INVERTIG.PRO by providing powerful water cooling for the most demanding of jobs, whilst also providing a convenient way of moving your machine around the workshop.

An Optional TIG-COOL 1400 Water Cooler is available in a smaller unit without the large front handle and cylinder carrier at the rear.

This type of water cooler is more suitable when the cooler is mainly positioned at the side of a bench and is moved more occasionally.








> INVERTIG.PRO                  Accesories

P1 iSYSTEM
Foot Control System

Heavy Duty Foot Control Unit
P1 iSYSTEM

R-TIG Torches  

R-TIG Torch iSYSTEM 8m

A range of R-TIG iSYSTEM torches is available for the INVERTIG.PRO
The range offers the user high duty cycles to match the performance of our machines

 
Back to content | Back to main menu